Acid-modified biomass-based N-doped O-rich hierarchical porous carbon as a high-performance electrode for supercapacitors.

Abstract

In contemporary society, the conversion and efficient utilization of waste biomass and its derivatives are of great significance. Carbonized wood (CW) is an easily accessible and cost-effective green resource, but it has limitations as an electrode material due to its low specific surface area, limited active sites and poor conductivity. Therefore, it is crucial to improve the performance of biomass-based materials by using activation, heteroatom doping and modification methods to enhance the specific surface area and active sites. In this study, we developed acid-modified urea-doped activated carbonized wood (AUACW) with a three-dimensional (3D) porous structure and porosity, achieving a high specific surface area of 1321.3 m2 g-1. In addition, the degree of graphitization (ID/IG = 1.0) provides good conductivity and a large number of active sites, which are conducive to charge transfer and ion diffusion. The increase of nitrogen and oxygen elements enhances the surface wettability of the material and provides additional pseudocapacitance. The specific capacitance of AUACW reaches 435.84 F g-1 at 0.8 A g-1 with a 93.6% capacitance retention after 10 000 cycles in a 1 M KOH electrolyte. More attractively, a symmetrical supercapacitor (SSC) based on AUACW delivers an energy density of 22.61 W h kg-1 at a power density of 533.26 W kg-1. This work demonstrates the promising potential of utilizing waste biomass to develop green and valuable carbon materials for supercapacitors.