Abstract
The superplastic forming of Ti alloy welds has great application prospects in producing integrated components. However, the nugget zone (NZ) of the Ti alloy welds, produced by fusion welding or conventional friction stir welding (FSW), consists of lamellar microstructure, which exhibits either low superplasticity or high superplastic temperautre and low strain rate. As a result, the NZ plays a leading role in hindering the superplastic forming of the whole welds. In this study, submerged friction stir welding (SFSW) was conducted in Ti-6Al-4V alloy for the first time, and a defectfree weld with the NZ consisting of a strip microstructure was obtained. The NZ exhibited a low-temperature superplasticity at 600°C, which was the lowest superplastic temperature ever reported in the Ti alloy welds. Besides, at 800°C, the NZ showed high strain rate (3×10−2 s−1) superplasticity and a largest elongation of 615% at 1×10−3 s−1. Compared to conventional FSW joints, the NZ of SFSW joint exhibited a much lower flow stress and a decrease in optimal superplastic temperature by 100°C. This is mainly attributed to the easy globularization of the strip microstructure, enhancing the ability of grain/phase boundary sliding.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
