Abstract
In the present work hard turning of AISI 52100 steel has been performed using Polycrystalline cubic boron nitride (PCBN) tools. The input parameters considered are cutting speed, feed, depth of cut, nose radius and negative rake angle and the measured responses are machining force and workpiece surface temperature. Experiments are planned as per Central Composite Design (CCD) of Response Surface Methodology (RSM). The effect of input parameters and their interactions are discussed with main effects plot. Further, the multi-objective optimization scheme is proposed by adopting Grey Relational Analysis (GRA) coupled with Principle Component Analysis (PCA). Results demonstrated that speed is the most significant factor affecting the responses followed by negative rake angle, feed, depth of cut, and nose radius. The optimum cutting parameters obtained are cutting speed 1000 rpm, feed 0.02 mm/rev, depth of cut 0.5 mm, Nose radius 1 mm and Negative rake angle 5o.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.