Abstract

With increasing heat accumulation in advanced modern electronic devices, dielectric materials with high thermal conductivity (λ) and excellent electrical insulation have attracted extensive attention in recent years. Inspired by mussel, hexagonal boron nitride (hBN) and graphene oxide (GO) are assembled to construct mhBN@GO hybrids with the assistance of poly(catechol-polyamine). Then, mhBN@GO hybrids are dispersed in carboxy nitrile rubber (XNBR) latex via emulsion coprecipitation to form elastomer composites with a high λ and satisfactory insulating properties. Thanks to the uniform dispersion of mhBN@GO hybrids, the continuous heat conduction pathways exert a significant effect on enhancing the λ and decreasing the interface thermal resistance of XNBR composites. In particular, the λ value of 30 vol% mhBN@GO/XNBR composite reaches 0.4348 W/(m·K), which is 2.7 times that of the neat XNBR (0.1623 W/(m·K)). Meanwhile, the insulating hBN platelets hinder the electron transfer between adjacent GO sheets, leading to satisfactory electrical insulation in XNBR composites, whose AC conductivity is as low as 10-10 S/cm below 100 Hz. This strategy opens up new prospects in the assembly of ceramic and carbonaceous fillers to prepare dielectric elastomer composites with high λ and satisfactory electrical insulation, making them promising for modern electrical systems.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call