Abstract
A real-time measuring atomic force microscope (AFM) equipped with a high-resolution three-axis laser interferometer has been constructed. A three-sided mirror as a sample holder is placed on a three-dimensional (3D) scanner which was designed for axis-independent scanning. The mirror is scanned so that the cantilever traces the surface form. The traces of the mirror are monitored along the X/ Y/ Z-axis independently and simultaneously by the laser interferometers and fed back to the X– Y servo-scan and Z-height control. Each interferometer unit has a four-pass optical arrangement and homodyne detection system. After the digital signal processing of the four-phase output (phase-shifted by 90°) from the detectors, the signal is introduced into a fringe counter, which has an electrical phase resolution of 2048. A final system resolution of 0.04 nm ( λ/16 384) has been realized. Topographic images of a standard sample of a precisely etched grid pattern (pitch and height) were taken with an without interferometric calibration. Piezo distortions along the X– Y plane caused by hysteresis or creep were almost eliminated.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
