Accurate measurement of residual stresses of 2219-T87 aluminum alloy friction stir welding joints based on properties of joints

Abstract

In order to avoid the deviation caused by calculating the residual stresses of welding joints with the release coefficients of the same parent metal, a new method has been proposed based on the properties of weld joints. Since the mechanical property of 2195-F Al alloy is close to that of 2219-T87 Al alloy Friction stir welding (FSW) joint, 2195-F Al alloy is selected as the substitute material of 2219-T87 Al alloy FSW joint in the calibration test. Release coefficients of 2195-F Al alloy and proper correction coefficient are used to calculate the residual stresses of 2219-T87 Al alloy FSW joints. Compared to the results calculated with release coefficients of its parent metal, it has been proved that the proposed correction method is more precise in residual stresses measurement of weld joints. The mathematical analysis and the results of verification tests have shown that this new method is reliable, and it will provide guidance in academic research and engineering application of the spherical indentation strain-gauge method.