Accurate coupled vibration analysis of a piezoelectric ceramic cylinder by the superposition method

Abstract

The radial and thickness extensional vibration modes in piezoelectric cylinders are always inevitably coupled due to the finite dimension, Poisson’s ratio, and piezoelectric effect. In this paper, an analytical model based on the superposition method is developed to obtain the coupled dynamic response of a piezoelectric cylinder under an applied voltage. The problem can be described mathematically by three partial differential equations with mixed boundary conditions in the cylindrical coordinates system. To solve this, the problem is decomposed first into two building block – vibrations in radial and thickness directions. In each building block, the expressions of displacements and electric potential are assumed and then the induced dynamic responses, such as in-plane stress and electric displacements, are calculated. Finally, the vibration responses of the two building blocks are superimposed to satisfy the mixed boundary conditions using Fourier and Fourier-Bessel series expansions. Electrical impedance of a typical piezoelectric disk and frequency spectrum of piezoelectric cylinders of different diameter-to-thickness ratios are calculated by the present analytical method as well as by finite element method. Comparison shows an excellent agreement. This analytical model can be applied to material characterization and the design and the optimization of the active elements of piezoelectric devices.