Abstract
In this study, a colloidal gel of magnetic Fe3O4 nanoparticles was used in the development of a simple and accurate dispersive solid phase extraction method for the extraction/preconcentration of trace levels of cobalt ions in urine samples. The eluted cobalt ions were determined by slotted quartz tube-flame atomic absorption spectrophotometry (SQT-FAAS). The effects of the type and volume of buffer solution, volume of magnetic colloidal gel, type and period of mixing, concentration and volume of the eluent were investigated and optimized to obtain the best experimental outputs. Under the optimum conditions, the limits of detection and quantification were found as 4.6 and 15 ng mL−1, respectively. The developed method provided a 61.5 folds enhancement in the detection power of the flame atomic absorption spectrophotometry. Method validation was performed by spiking experiments using matrix matching method. The percent recoveries were found to be close to 100% for the spiked samples, which validate the accuracy and the applicability of the developed method to the urine samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.