Accuracy of dental implant surgery with robotic position feedback and registration algorithm: An in-vitro study

Abstract

BackgroundThe purpose of this study was to develop and validate a positioning method with hand-guiding and contact position feedback of robot based on a human-robot collaborative dental implant system (HRCDIS) for robotic guided dental implant surgery. MethodsAn HRCDIS was developed based on a light-weight cooperative robot arm, UR5. A three-dimensional (3D) virtual partially edentulous mandibular bone was reconstructed using the cone bone computed tomography images. After designing the preoperative virtual implant planning using the computer software, a fixation guide worn on teeth for linking and fixing positioning marker was fabricated by 3D printing. The fixation guide with the positioning marker and a resin model mimicking the oral tissues were assembled on a head phantom. The planned implant positions were derived by the coordinate information of the positioning marker. The drilling process using the HRCDIS was conducted after mimicking the experimental set-up and planning the drilling trajectory. Deviations between actual and planned implant positions were measured and analyzed. ResultsThe head phantom experiments results showed that the error value of the central deviation at hex (refers to the center of the platform level of the implant) was 0.79 ± 0.17 mm, central deviation at the apex was 1.26 ± 0.27 mm, horizontal deviation at the hex was 0.61 ± 0.19 mm, horizontal deviation at the apex was 0.91 ± 0.55 mm, vertical deviation at the hex was 0.38 ± 0.17 mm, vertical deviation at the apex was 0.37 ± 0.20 mm, and angular deviation was 3.77 ± 1.57°. ConclusionsThe results from this study preliminarily validate the feasibility of the accurate navigation method of the HRCDIS.