Abstract
ObjectivesThe aim of this study was to evaluate the accuracy of a chairside reverse scanbody workflow for a complete arch implant-supported prosthesis using four intraoral scanners (IOSs) and a desktop scanner. Material and MethodsA complete arch implant-supported interim prosthesis was designed and milled in polymethylmethacrylate. Six reverse scanbodies (ScAnalog) were connected to the implant-prosthetic connections and twenty scans were made extraorally using four IOS devices (TRIOS 3, TRIOS 5, Primescan v.5.2, Medit i700W) and one desktop scanner (E4 RED). A coordinate machine (ATOS Q GOM) was used to assess the milling distortion. The scanbody positions were compared to the reference CAD design using metrology software. Linear and angular measurements per implant-prosthetic connection were considered for trueness and precision. Data were analyzed using one-way ANOVA and Bonferroni test. ResultsTrueness values were 118.14 ± 25.49 µm for TRIOS 3, 84.62 µm ±19.10 for TRIOS 5, 106.39 ± 27.58 µm for Primescan v.5.2, 120.25 ± 27.44 µm for Medit i700W and 65.36 ± 4.66 µm for E4 RED. Significant differences in mean trueness values were found among IOS and E4 RED. Precision values were 108 ± 55 µm for TRIOS 3, 86 ± 55 µm for TRIOS 5, 104 ± 55 µm for Primescan v.5.2, 90 ± 54 µm for Medit i700W and 18 ± 11 µm for E4 RED. Significant differences in precision were found between IOS and E4 RED. ConclusionsA chairside reverse scanbody workflow with IOS remains less accurate compared to similar workflow with a desktop scanner. Clinical significanceA chairside reverse scanbody workflow is a valuable alternative but the IOS device should be selected with caution because in the present study, only TRIOS5 was capable to achieve an accuracy below the clinical acceptable thresholds. The use of a desktop scanner remains the best choice for this clinical workflow. Additionally, the milling distortion of the interim prosthesis plays a major role in this reverse scanbody workflow and should be kept as low as possible.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.