Abstract
PurposeTo estimate the rate of pedicle screw malpositioning associated with placing pedicle screws using intraoperative computed tomography (CT)-guided spinal navigation. MethodsWe analysed the records of 219 patients who underwent pedicle screw fixation using O-arm-based navigation. Screw placement accuracy was evaluated on intraoperative CT scans acquired after pedicle screw insertion. Breaches were graded according to the Gertzbein classification (grade 0–III). ResultsOf 1152 pedicle screws included, 47 had pedicle violations noted on intraoperative CT. Pedicle screw violation was noted for 17 of 241 screws placed in the cervical spine (overall breach rate, 7.05%; 3.73% and 3.3% with grade I and II, respectively), for 11 of 300 screws placed in the thoracic spine (overall breach rate, 3.67%; 2%, 1%, and 0.67% with grade I, II, and III, respectively), and for 22 of 611 screws placed in the lumbar spine (overall breach rate, 3.6%; 2.29% and 0.82% with grade I and II, respectively). The rate of accuracy of pedicle screw fixation was 93%, 96.33%, and 96.4% for the cervical, thoracic, and lumbar spine, respectively. ConclusionsUsing O-arm-based intra-operative three-dimensional scans for navigation can improve the reliability, accuracy, and safety of pedicle screw placement, reducing the risk for reoperation and hospitalization due to implant-related complications. Further improvement may be achieved by adequate consideration of potential sources of errors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.