Abstract

This paper presents a study of the application of the properties of water vapor as a gas with high potential energy, strongly dependent on temperature and pressure. Analyses of water vapor sorption on two types of silica gels (SG) (90 wt.%) enriched with carbon nanotubes (CNTs) (10 wt.%), in the context of their application in the design of adsorption beds in adsorption cooling and desalination systems were conducted. The sorption experiments were performed by gravimetric method at a relative humidity of 0% < RH < 100% and temperatures of 298 K, 313 K, and 333 K. The addition of CNTs to SG caused a decrease in the sorption capacity and depended on the temperature. As the process temperature increased, a lower SG/CNT mixtures sorption capacity to vapor was obtained. The highest influence of CNTs was observed at the highest temperature, and the average decrease of sorption capacity was several percent. The ratio of SG/CNT sorption capacity to pure SG values was below 1 in most measurements.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call