Access to sustained high-beta with internal transport barrier and negative central magnetic shear in DIII-D

Abstract

High values of normalized β (βN∼4) and safety factor (qmin∼2) have been sustained simultaneously for ∼2s in DIII-D [J.L. Luxon, Nucl. Fusion 42, 64 (2002)], suggesting a possible path to high fusion performance, steady-state tokamak scenarios with a large fraction of bootstrap current. The combination of internal transport barrier and negative central magnetic shear at high β results in high confinement (H89P>2.5) and large bootstrap current fraction (fBS>60%) with good alignment. Previously, stability limits in plasmas with core transport barriers have been observed at moderate values of βN (<3) because of the pressure peaking which normally develops from improved core confinement. In recent DIII-D experiments, the internal transport barrier is clearly observed in the electron density and in the ion temperature and rotation profiles at ρ∼0.5 but not in the electron temperature profile, which is very broad. The misalignment of Ti and Te gradients may help to avoid a large local pressure gradient. Furthermore, at low internal inductance ∼0.6, the current density gradients are close to the vessel and the ideal kink modes are strongly wall-coupled. Simultaneous feedback control of both external and internal sets of n=1 magnetic coils was used to maintain optimal error field correction and resistive wall mode stabilization, allowing operation above the free-boundary β limit. Large particle orbits at high safety factor in the core help to broaden both the pressure and the beam-driven current profiles, favorable for steady-state operation. At plasma current flat top and β∼5%, a noninductive current fraction of ∼100% has been observed. Stability modeling shows the possibility for operation up to the ideal-wall limit at β∼6%.