Accelerometer-based SOC estimation methodology for combustion control applied to Gasoline Compression Ignition

Abstract

The European Community’s recent decision to suspend the marketing of cars with conventional fossil-fueled internal combustion engines from 2035 requires new solutions, based on carbon-neutral technologies, that ensure equivalent performances in terms of reliability, trip autonomy, refueling times and end-of-life disposal of components compared to those of current gasoline or diesel cars. The use of bio-fuels and hydrogen, which can be obtained by renewable energy sources, coupled with high-efficiency combustion methodologies might allow to reach the carbon neutrality of transports (net-zero carbon dioxide emissions) even using the well-known internal combustion engine technology. Bearing this in mind, experiments were carried out on compression ignited engines running on gasoline (GCI) with a high thermal efficiency which, in the future, could be easily adapted to run on a bio-fuel. Despite the well-reported benefits of GCI engines in terms of efficiency and pollutant emissions, combustion instability hinders the diffusion of these engines for industrial applications. A possible solution to stabilize GCI combustion is the use of multiple injections strategies, typically composed by 2 early injected fuel jests followed by the main injection. The heat released by the combustion of the earlier fuel jets allows to reduce the ignition delay of the main injection, directly affecting both delivered torque and center of combustion. As a result, to properly manage GCI engines, a stable and reliable combustion of the pre-injections is mandatory. In this paper, an estimation methodology of the start of combustion (SOC) position, based on the analysis of the signal coming from an accelerometer sensor mounted on the engine block, is presented (the optimal sensor positioning is also discussed). A strong correlation between the SOC calculated from the accelerometer and that obtained from the analysis of the rate of heat release (RoHR) was identified. As a result, the estimated SOC could be used to feedback an adaptive closed-loop combustion control algorithm, suitable to improve the stability of the whole combustion process.