Acceleration of premixed H[formula omitted]-Air-Steam flames when accounting for thermal radiation

Abstract

Listen

Translate article

Diluting hydrogen flames with steam can increase flame stability and reduce nitrogen oxide emissions. While the effects of dilution on the flame characteristics due to variations in chemistry or transport properties have been well investigated, this is not the case for those related to thermal radiation. Thermal radiation is indeed often neglected in free flame simulations. However, it can be critical in diluted flames in which participating species are present in the fresh gases. This study explores thermal radiation’s impact on H2-Air flames diluted with steam through 1D laminar flame computations. To this end, a reactive fluid solver is coupled with a semi-analytical thermal radiation code. Both the grey gas approximation, for a preliminary understanding, and the more accurate CK narrow-band model, for detailed simulations that account for spectral-dependent gas properties, are used. The combustion numerical setup is validated against literature results. Three main thermal radiation effects are highlighted: a preheating of the fresh gases, an increased laminar flame speed, and a decreased temperature in the burnt gases. It is found that domain length considerably affects this preheating and flame speed, which can then affects laminar burning velocity measurements. It is shown that thermal radiation and combustion can often be decoupled and that a preheated adiabatic flame can recover the main characteristics of the corresponding radiative flame. The increase of the laminar flame speed by thermal radiation is reported for a wide range of equivalence ratios, dilution levels, and pressures. The observed acceleration is especially significant for lean and very lean flames which can be up to 500% faster when considering thermal radiation.