Accelerated Weathering of Coated and Uncoated Beech Wood Modified with Citric Acid

Abstract

Chemical modification of wood can minimise wood drawbacks in exterior application, such as moisture absorption, swelling and shrinkage, susceptibility to photodegradation and microbial attack. We modified a beech wood with 7.0 % water solution of citric acid and 6.5% sodium-hypophosphite monohydrate (SHP) as a catalyst and investigated the colour stability and weathering performance of coated and uncoated wood under accelerated weathering conditions. The modified and unmodified beech wood samples were coated with transparent water-borne stain and transparent solvent-borne stain, and with reference stain. The accelerated outdoor exposure was conducted in a QUV weathering tester (Q-Panel Company) equipped with UVA-340 florescent lamps for 56 days (1344 hours). The surface of samples was examined for colour and gloss changes, adhesion and appearance of flaking, cracking, blistering and chalking. The overall colour change (ΔE*) of coated beech wood samples at the end of exposure was smaller in unmodified wood samples. The trend of gloss changes of modified and unmodified wood samples was very similar during the exposure. At the end of exposure unmodified beech wood samples exhibited better weathering performance than modified beech wood samples. In order to achieve the optimal protection of wood modified with citric acid the new type of finishes should be developed.