Abstract
LiNi0.5Co0.2Mn0.3O2 particles of uniform size were prepared through carbonate co-precipitation method with aca- cia gum. The precursor of carbonate mixture was calcined at 800 °C, and a well-crystallized Ni-rich layered oxide was got. Thephasestructure and morphologywerecharacterized byX- ray diffraction (XRD), field emission scanning electron mi- croscopy (SEM) and transmission electron microscopy (TEM). The micro-sized particles delivered high initial dis- charge capacity of 164.3 mA h g −1 at 0.5 C (1 C= 200 mA g −1 ) between 2.5 and 4.3 V with capacity retention of 87.5 % after 100 cycles. High reversible discharge capaci- ties of 172.4 and 131.4 mA h g −1 were obtained at current density of 0.1 and 5 C, respectively. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were per- formed to further study the LiNi0.5Co0.2Mn0.3O2 particles. Anyway, the excellent electrochemical performances of LiNi0.5Co0.2Mn0.3O2 sample should be attributed to the use of acacia gum.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.