Abstract 6031: Microfluidics: Simulating the gut microbiome for early cancer detection

Abstract

Abstract Background: Cancer is the second leading cause of death globally and ~39.5% of people will be diagnosed with cancer at some point during their lifetimes. Thus, there is an unmet need to identify novel strategies for early cancer detection and prevention. The emerging evidence suggests that the gut microbiome has a role in promoting cancer. This microbiome including bacteria plays a vital role in maintaining homeostasis in the body. An imbalance in bacterial composition may cause diseases including cancer. Here we developed a microfluidic chip that can accurately simulate the gut microbiome to test the effects of bacteria and therapies on cancer cells. Methods and Results: To test the causal effect of bacteria on cancer, we developed a new high-throughput microfluidic device for simulating the environment of the gut. Initially, we used the photolithography technique where we designed the chip in AutoCAD and fabricated using photoresist resins and Polydimethylsiloxane (PDMS). Next, we tested the effect of bacteria on the growth of colorectal cancer cells. For this, we cultured colorectal cancer cells (HCT-116) with lipopolysaccharide (LPS), which is found in the outer membrane of bacteria, as well as the Bacillus bacteria in our microfluidics. Our data show that both LPS and Bacillus significantly accelerate the growth of cancer cells 2.02 times (p value = 0.012) and 1.58 times (p value = 0.011), respectively, over a 4 day culture period. These results show that the increased presence of certain bacteria can promote cancer cell growth and that our chip can be used to test the specific correlation between bacteria and cancer cell growth. The previously described method was inefficient and time-consuming. To overcome this limitation, we designed a new chip that allows running 16 samples at once with improved efficiency and accuracy. The template of the device that had 16 microfluidic channels was printed by a 3D printer and used for PDMS replica molding. The PDMS device was attached to the modified multiwell plate to feed media to and collect waste from each channel in a high-throughput manner. In the initial design, the bacteria grew faster than cancer cells taking over the chips. Our new design has dual layered chambers to keep bacteria and cancer cells separated by a membrane, allowing only bacterial secretions to pass through the membrane to cancer cells, mimicking the human gut. The new design also allowed the chip to maintain continuous microfluidic flow and a hypoxic environment. Conclusion: Our research demonstrates that the new microfluidic device has broader implications including simulating other body organs such as the lung and liver, and testing the impact of viruses such as influenza and COVID-19 on human cells. This device can be used to test both the effect of bacteria and new treatment on clinical samples for the identification of personalized therapy, thus reducing the need for mouse model testing, which is a lengthy and expensive process. Citation Format: Ekansh Mittal, Young Bock Kang. Microfluidics: Simulating the gut microbiome for early cancer detection [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2022; 2022 Apr 8-13. Philadelphia (PA): AACR; Cancer Res 2022;82(12_Suppl):Abstract nr 6031.