Abstract

Introduction: Tetralogy of Fallot (ToF) typically requires surgical repair of the right ventricular outflow tract (RVOT) and subsequent placement of an artificial pulmonary valve. Bioprosthetic valve longevity is highly variable and there is currently little understanding of what hemodynamic factors may lead to early valve dysfunction. Hypothesis: We hypothesize that cardiac output and valve orientation impact the performance of bioprosthetic valves by affecting blood flow patterns in the RVOT. Methods: We analyzed hemodynamics in a 3D printed ToF anatomy model in a physiological flow loop. A 25mm surgical valve was implanted in the model at two orientations: native and rotated 180 degrees. Full 3D, three-component, phase-averaged velocity fields were obtained over the cardiac cycle using 4D flow MRI at cardiac outputs of 2, 3.5, and 5 L/min. We acquired images of valve leaflet motion at 1500Hz. The 4D flow MRI and high-speed camera experiments were run identically, allowing us to examine the relationship between flow fields and leaflet motion. Results: The full velocity fields from the MRI scans revealed key differences among cases in flow features including location of reverse flow regions, systolic jet shape, and asymmetry local to the valve. At 2 L/min, the forward flow through the jet was more asymmetric compared to the other cases and a strong vortex formed, indicating a region of recirculation. With the rotated valve orientation, the 2 L/min case also produced a unique pattern as flow was washed from the RVOT inner curve back toward the center of the valve (Fig 1). Leaflet behavior during systole varied with cardiac output as well, as higher frequency flutter was observed at 5 L/min and the effective valve orifice area was decreased by 8.5% at 2 L/min compared to 5 L/min. Conclusions: We observed key differences in flow patterns and leaflet motion due to cardiac output and valve orientation that could impact leaflet loading and fatigue and long-term valve function.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call