Absorption-dominant electromagnetic interference shielding material using MXene-coated polyvinylidene fluoride foam

Abstract

MXene (Ti3C2Tx), known for its exceptional electrical conductivity, unique two-dimensional structure, extensive surface functionality, and hydrophilicity, has emerged as a leading candidate for electromagnetic interference (EMI) shielding applications. Despite these excellent characteristics, EMI shielding materials based on MXene mostly utilize the reflection mechanism, which may cause secondary interferences. This study introduces an approach to utilize MXene as absorption-dominant EMI shielding materials. By engineering a porous layer of polyvinylidene fluoride (PVDF) atop MXene nanoflakes, we achieved a synergistic enhancement in EMI shielding effectiveness (SE) and absorptivity. The PVDF foam serves as an effective impedance matching layer, substantially enhancing the absorption of electromagnetic waves into the shielding material. Incorporating electrically conductive MXene nanoflakes to form a thin film creates a robust conductive network, fully leveraging its inherent performance. This network efficiently dissipates EM waves, thereby significantly enhancing the EMI SE. The shielding performance of this composite was thoroughly evaluated across both the X-band (8.2 GHz–12.4 GHz) and the Ka-band (26.5 GHz–40 GHz) frequencies. It demonstrated high EMI SE, attributed to mechanisms predominantly based on absorption. Specifically, it achieved an EMI SE of approximately 63.3 dB with high absorptivity (0.74) in the X-band and approximately 73.3 dB with high absorptivity (0.85) in the Ka-band. These findings underscore its potential as a route to develop absorption-dominant EMI shielding materials.