Abstract
The transport of water vapor through a Nafion membrane includes absorption of water at one membrane/gas diffusion layer interface, water transport in the membrane, and desorption of water at another interface. Based on the structure of the membrane, a model for the water transport through the membrane is presented. It was assumed that the mass-transfer coefficients for the absorption and desorption of water and the water diffusion coefficient were dependent on the volume fraction of water in the membrane. These parameters were determined from steady-state water transport flux through the membranes at different water activity gradients. The results show that the mass-transfer coefficient for the absorption of water (, ) is much lower than that for the desorption of water (, ). The parameters and describe the nonequilibrium water uptake of the membrane on operating conditions. Using these obtained parameters, the simulation results agree well with experimental data under many different conditions, including thickness of the membrane, water vapor/liquid water, temperature, and flow rate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
