Abstract

In order to achieve a high signal-to-noise ratio by using small laser energy and telescope aperture, we present a detection method based on Rayleigh-Brillouin scattering (RBS) for the measurement of atmospheric temperature without response functions and calibration procedures by using high spectral resolution lidar (HSRL). Different from the traditional HSRL, a Fabry-Pérot interferometer (FPI) with a continuous tunable cavity and polarization optical scheme are employed in a high spectral resolution filter. In order to continuously change the resonant frequency of the FPI, an electro-optical crystal of potassium dideuterium phosphate (DKDP) with two ring electrodes is used as a continuous tunable cavity in the FPI. At each scanned frequency point corresponded with the resonant frequency of the FPI, the received signals of four discrete points on RBS are obtained. Atmospheric temperature is inverted by using a RBS model. The polarization optical scheme is used to suppress the solar background light, and improve the utilization of return signals. In detection experiment of atmospheric temperature, the detection height is 2 km at night and 1.5 km during the day by using a pulsed energy of 30 mJ and telescope diameter of 250 mm. The results are in good agreement with the data detected by radiosonde.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call