Abstract

The article presents the study results of the structure and properties of paper ashless filters "Blue tape". It is shown that the "Blue tape" filter paper has a fairly high density with a relatively small number and size of voids (pores) between the fibers. When processing filters in the corona discharge field, an increase in their mechanical properties by 3.5–6% is observed, this is mainly due to the strengthening of the interfiber bond forces. The implementation of increased electrostatic bonding forces in the sheet structure leads to an increase in the resistance to the external tensile force necessary to break the paper filter. The observed dependences are associated with the orientation and ordering of the pulp and paper material structural elements, with an increase in the potential of the double electric layer on the fibers surface under the charge action carriers injected into the paper volume from the corona discharge and with the formation of a hetero charge due to the orientation of the polar cellulose groups and macromolecule segments during electreting. This is confirmed by the increase in the ζ – potential of the fibers of filters during processing in a negative corona discharge - it was found that the zeta – potential value of electret ashless filters is 18% higher than for the initial ones. The achieved results of increasing the ashless filters physico- mechanical properties will increase the efficiency of their use.

Highlights

  • Бумага и картонВ работе представлены результаты исследования структуры и свойств бумажных обеззоленных фильтров «Синяя лента»

  • На фоне ужесточения требований к качеству продукции, выпускаемой в различных отраслях производства, необходимо постоянное совершенствование технологии производства и модифицирование целлюлознобумажных материалов (ЦБМ), в том числе фильтрующих видов бумаги и картона с целью повышения их эксплуатационных характеристик [1–3

  • The observed dependences are associated with the orientation and ordering of the pulp and paper material structural elements, with an increase in the potential of the double electric layer on the fibers surface under the charge action carriers injected into the paper volume from the corona discharge and with the formation of a hetero charge due to the orientation of the polar cellulose groups and macromolecule segments during electreting

Read more

Summary

Бумага и картон

В работе представлены результаты исследования структуры и свойств бумажных обеззоленных фильтров «Синяя лента». При обработке фильтров в поле коронного разряда наблюдается повышение их механических свойств на 3.5–6%, что вызвано преимущественно усилением межволоконных сил связей. Наблюдаемые зависимости связаны с ориентацией и упорядочиванием элементов структуры целлюлозно-бумажного материала, с ростом потенциала двойного электрического слоя на поверхности волокон под действием носителей заряда, инжектируемых в объем бумаги из коронного разряда и с образованием гетерозаряда за счет ориентации полярных группировок целлюлозы, сегментов макромолекул во время электретирования. Это подтверждается ростом ζ-потенциала волокон обеззоленных фильтров при обработке в отрицательном коронном разряде – установлено, что значение дзета-потенциала волокон электретированных обеззоленных фильтров на 18% больше, чем для исходных. Значительный вклад в формирование уровня прочностных свойств бумажного листа вносят и электростатические связи [10, 11. Электрокинетический потенциал характеризует электрохимическое равновесие на поверхности раздела фаз и зависит от свойств дисперсионной среды и дисперсной фазы, по его величине можно судить о мере интенсивности проявления электрокинетических явлений. Цель настоящих исследований – изучение комплекса прочностных и электрофизических свойств и их взаимосвязи для исходной фильтровальной бумаги и бумаги, обработанной в униполярном коронном разряде

Экспериментальная часть
Обсуждение результатов
Наименование образца СЛ ЭСЛ
Начальные значения
Findings
Список литературы
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call