Abnormal mechanical response in a silicon bearing medium carbon low alloy steel following quenching and bainitic holding versus quenching and partitioning treatment

Abstract

Multiphase advanced high strength low alloy steels having a refined microstructure of hard bainite and/or martensite laths, interspersed with finely divided retained austenite films, are the potential candidate materials for futuristic industrial applications, such as automotive industry, structural parts, crankshafts and shafts, and powertrain components. In this study, a silicon-bearing, medium-carbon low alloy steel grade of DIN 1.5025 was subjected to both quenching and bainitic holding (Q&B), as well as quenching and partitioning (Q&P) isothermal heat treatments at temperatures closely above and below the martensite start temperature (Ms), respectively. The mechanical response of heat treated samples was evaluated by conducting hardness and tensile tests, corroborated by XRD analysis and metallography using both scanning electron microscopy combined with electron backscatter diffraction as well as transmission electron microscopy. The experimental results showed that a number of Q&B heat treated samples displayed a superior combination of high strength levels with good ductility and work hardening capacity in comparison to that of Q&P ones, akin to the requirements for third generation high strength multiphase steels. It was also found that the superior mechanical response of Q&B heat treated samples was rationalized in respect of the formation of tough strong multiphase microstructures involving a fine mixture of hard bainite and/or martensite laths along with thin films of mostly interlath retained austenite that imparted superior combination of ductility and tensile strength through TRIP phenomenon. Moreover, limited tensile test results conducted in this study, supported by XRD and electron microscopy analyses, suggested that the TRIP response was quite effective in the Q&B multiphase samples containing more than 18 vol.% of retained austenite.