Abstract
AbstractMicrostructural evolution and high‐temperature ablative damage mechanism of Csf/SiC‐BN composites with and without polyborosilazane (PBSZ) as sintering aids that can convert to polymer‐derived SiBCN ceramics (PDCs‐SiBCN) by cross‐linking and pyrolysis during sintering were studied. The density of Csf/SiC‐BN composites increases from 2.17 to 2.25 g/cm3 with 10 wt.% sintering aids because PBSZ promotes rearrangement and redistribution of raw materials by pyrolysis during the sintering process. With the increase of carbon fiber content, ablation performance (mass ablation rate: 15.25 mg/s; linear ablation rate: 0.100 mm/s) negligibly decreases, compared to counterparts with lower fiber content (mass ablation rate: 16.53 mg/s; linear ablation rate: 0.072 mm/s) because the presence of PDCs‐SiBCN partially compensates for the detrimental effect of carbon fibers on ablation performance. Csf/SiC‐BN composites with and without PBSZ show similar phase composition mainly containing quartz, amorphous SiO2, and matrix crystallization products and morphology after ablation because of similar phase composition before ablation. The ablation mechanism is oxidative corrosion and mechanical scouring and stripping.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
