Abstract
AbstractHigh‐temperature/high‐salinity (HTHS) reservoirs contain a significant fraction of the world's remaining oil in place and are potential candidates for enhanced oil recovery (EOR). Selection of suitable surfactants for such reservoirs is a challenging task. In this work, two synthesized zwitterionic surfactants bearing a saturated and an unsaturated tail, namely 3‐(N‐stearamidopropyl‐N,N‐dimethyl ammonium) propanesulfonate and 3‐(N‐oleamidopropyl‐N,N‐dimethyl ammonium) propanesulfonate, respectively, were evaluated. The surfactant with the unsaturated tail showed excellent solubility in synthetic seawater (57,643 ppm) and in formation brine (213,734 ppm). However, the unsaturated surfactant with a saturated tail showed poor solubility, and therefore it was not evaluated further. The thermal stability of the synthesized unsaturated surfactant solution in seawater was evaluated by heating the solution at 90 °C in a sealed aging tube for 2 weeks. The thermal stability of the unsaturated surfactant was confirmed by FTIR and NMR analysis of the aged samples at such harsh conditions. The critical micelle concentration (CMC) of the synthesized unsaturated surfactant in seawater was 1.02 × 10−4 mol L−1, while the surface tension at CMC was 30 mN m−1. The synthesized unsaturated surfactant was able to reduce the oil–water interfacial tension to ~10−1 mN m−1 at different conditions. A commercial copolymer of acrylamide and 2‐acrylamido‐2‐methylpropane sulfonic acid (AM‐AMPS) was tested for EOR applications in HTHS conditions. The addition of the synthesized unsaturated surfactant to the AM‐AMPS copolymer increased the viscosity of the system. The increase in oil recovery by injecting the unsaturated surfactant solution and the surfactant–polymer mixture in solution was 8 and 21%, respectively. The excellent properties of the synthesized unsaturated surfactant show that surfactants with an unsaturated tail can be an excellent choice for HTHS reservoirs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have