Abstract

This paper describes a novel divide-by-32/33 dual-modulus prescaler (DMP). Here, a new combination of DFF has been introduced in the DMP. By means of the cooperation and coordination among three types, DFF, SCL, TPSC, and CMOS static flip-flop, the DMP demonstrates high speed, wideband, and low power consumption with low phase noise. The chip has been fabricated in a 0.18-μm CMOS process of SMIC. The measured results show that the DMP's operating frequency is from 0.9 to 3.4 GHz with a maximum power consumption of 2.51 mW under a 1.8 V power supply and the phase noise is −134.78 dBc/Hz at 1 MHz offset from the 3.4 GHz carrier. The core area of the die without PAD is 57 × 30 μm2. Due to its excellent performance, the DMP could be applied to a PLL-based frequency synthesizer for many RF systems, especially for multi-standard radio applications.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.