A Wideband High-power Low-loss Power Divider Using Half-height Pin Gap Waveguide Technology

Abstract

In this paper, for the first time, a wideband low -loss high-power equally splitting power divider based on the new half-height pin form is introduced with bandwidth from 10 to 13.5 GHz centered at 11.75 GHz. Also, for the first time, a wideband transition from coaxial line to half-height pin gap waveguide with no need of any matching sections with excellent results at the band of (10:20 GHz) was achieved. The proposed transition shows excellent return loss which is lower than 30 dB (measured) at the transition bandwidth center frequency which is (15 GHz) with 0.2 dB (measured) insertion loss and return loss lower than 20 dB (measured) with 0.55 dB insertion loss at the rest of the bandwidth. The proposed transition and power divider designs were validated using circuit and 3D full-wave simulations and confirmed using experimental measurements with all agreements. The power divider has simple manufacturing due to the new pin form; hence, it is suitable for low-cost mass production of high-power mm-wave power dividers.