Abstract
In order to improve the reliability in traditional traveling wave protection, a wide-area protection method based on directional traveling wave energy was proposed in this paper. Firstly, the association matrix of transmission line/traveling wave protection device was established according to the connection relationship between transmission lines and traveling wave protection devices. Secondly, the fault direction could be identified by calculating the square ratio of positive and negative direction traveling wave energy. Then, the fault association matrix could be obtained by the specific determination principle between the recorded fault direction judgment results and the element in the fault association matrix, the fault line was thus determined. Simulation results showed that the proposed method was not only simple and feasible, but also fast and reliable. The fault line still could be correctly identified when the traveling wave protection device failed to start, the reliability and practicability of traveling wave protection were greatly improved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
