Abstract

This study describes a wide tuning-range VCO using tunable active inductor (TAI) topology and cross-coupled pair configuration for radio frequency operation. The TAI used two feedback loops to form a cascode circuit to obtain more degrees of freedom for inductance value. The TAI-VCO was fabricated using a 0.18 μm CMOS technology. The coarse frequency tuning is achieved by TAIs while the fine tuning is controlled by varactors. The fabricated circuit provides an output frequency range from 0.6 to 7.2 GHz (169%). The measured phase noise is from −110.38 to −86.01 dBc/Hz at a 1 MHz offset and output power is from −11.11 to −3.89 dBm within the entire frequency range under a 1.8 V power supply.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.