Abstract
This brief presents a wide-locking-range injection-locked frequency divider (ILFD) that uses an automatic frequency calibration loop. The proposed ILFD uses the ring oscillator to provide the high division ratio with small chip area. A dual-injection scheme is proposed in order to achieve the wide locking range of the ILFD. The free-running frequency of the ILFD is automatically digitally calibrated to reflect the frequency of the injected signal from the voltage-controlled oscillator. To control the frequency of the ILFD, the load current is digitally tuned with 3-bit control signal. The ILFD is fabricated using 65-nm CMOS process, and by tuning the load current, it achieves the wide operation frequency range of 14.1-45.8 GHz. When the input signal of 30 GHz is injected, the locking range of the ILFD is 7.2 GHz, while the power consumption is 2.5 mW from a 1-V supply voltage.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Circuits and Systems II: Express Briefs
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
