A wide-band in-air parametric array source composed of a circular plate with steps and a Langevin transducer with a horn

Abstract

Parametric array (PA) sources generate a directional sound beam, via the PA phenomenon. Practical PA sources, such as PA loudspeakers, have high power consumption, low sound quality, and high cost. The stepped-plate transducer, which consists of a Langevin transducer, a horn, and a radiating plate with steps, can provide high-intensity sound and a highly directional sound beam in the acoustic axis. This study investigated the use of a stepped-plate transducer to make a PA source with high directivity and a wide bandwidth. A stepped-plate transducer that had two different resonance frequencies (f1 = 77.5 kHz, f2 = 87.4 kHz) was designed for wide bandwidth, and the three different heights of the steps on the plate (ts1 = 2.28 mm, ts2 = 2.14 mm, ts3 = 2.02 mm) were intended to provide high directivity sound beams. The fabricated stepped-plate transducer demonstrated a 50 ± 3 dB sound pressure level for the difference frequency wave in the 4–19 kHz frequency range (with equalization), and 4.2–5.1° of HPBW was shown for the highly directional sound beam.