Abstract
A circularly polarized (CP) and wide-band monopole antenna with a miniaturized size is suggested in this study. The suggested structure is composed of a U-shaped radiator on the front side, a partial ground plane with two rectangle slots, and a quadrilateral-shaped parasitic strip on the back side of the FR4 substrate. A wide-band operation with S11 ≤ -10 dB was achieved by regulating the radiator and the partial ground that was placed on the second side of the antenna substrate. The CP was achieved when excited two modes with the same amplitude and a 90° phase difference. This could be generated by regulating the slots' dimensions in the ground plane. Moreover, a quadrilateral-shaped parasitic strip placed on the second side with the partial ground was utilized to extend the 3 dB axial ratio (AR) bandwidth. The suggested structure is simulated, prototyped, and measured to confirm the desired requirements with a total size of 30 × 32 mm2 (0.4 × 0.42 λ0 at 4 GHz). The tested outcomes have a bandwidth of S11 ≤ -10 dB (81.25%) (5.2 GHz, 3.8-9 GHz) and a 3 dB axial ratio (AR) bandwidth (30.7%) (1.63 GHz, 4.48-6.11 GHz). The antenna's different parameters are discussed, which recommend the suggested antenna to be used in UWB, sub 6 GHz, and WLAN wireless applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.