Abstract
A 10-pole quasi-elliptic bandpass filter (BPF) with a relatively wide passband in the very high frequency (VHF) band was designed and fabricated using YBCO thin films deposited on both sides of a LaAlO3 substrate. Single-spiral resonators were modified to generate strong coupling and reduce the parasitic coupling. We analysed the coupling polarities between the modified resonators. Two pairs of attenuation poles were introduced in the filter for sharp cut-off response. The measurements showed that the filter has a centre frequency of 255.8 MHz, fractional bandwidth of about 12.3%, insertion loss of smaller than 0.265 dB, and the return loss in the passband of better than 17.5 dB, in good agreement with computer simulations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.