Abstract
Reliable Inconel-sheathed cartridge heaters rated at hundreds or thousands of watts have been in use for many years. Miniature heaters have been manufactured, having axial leads, which when treated with an emissive coating meet or exceed Globar emissivities in the ir. Free-air temperatures approximating 800 degrees C have been obtained for power inputs of 10 W, while temperatures as high as 1150 degrees C are possible for short lifetimes, e.g., 10 h, at power dissipations of 24 W or more. Sources can be designed to operate from d or ac power with higher voltages and lower currents depending upon physical size limitations, resulting in simplified power supply problems. Although voltages from 12 V to 230 V are practical for larger units, the sources described below operated at 1060 degrees C from a nominal 1.07 A at 18.7 V d for apower consumption of 20 W variable continuously about this value. The small dimensions of these sources compare favorably to those of a 0.5-W electronic resistor. The present units are cylindrical, 1 cm long x 4 mm diam. The construction of smaller units is possible bt difficult under present state-of-the-art limitations.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
