A unifying approach to estimate the high‐cycle fatigue strength of notched components subjected to both uniaxial and multiaxial cyclic loadings

Abstract

ABSTRACTThis paper proposes an engineering method suitable for predicting the fatigue limit of both plain and notched components subjected to uniaxial as well as to multiaxial fatigue loadings. Initially, some well‐known concepts formalized by considering the cracking behaviour of metallic material under uniaxial cyclic loads have been extended to multiaxial fatigue situations. This theoretical extension allowed us to form the hypothesis that fatigue limits can be estimated by considering the linear–elastic stress state calculated at the centre of the structural volume. This volume was assumed to be the zone where all the main physical processes take place in fatigue limit conditions. The size of the structural volume was demonstrated to be constant, that is, independent from the applied loading type, but different for different materials. Predictions have been made by Susmel and Lazzarin's multiaxial fatigue criterion, applied using the linear–elastic stress state determined at the centre of the structural volume. The accuracy of this method has been checked by using a number of data sets taken from the literature and generated by testing notch specimens both under uniaxial and multiaxial fatigue loadings. Our approach is demonstrated to be a powerful engineering tool for predicting the fatigue limit of notch components, independently of material, stress concentration feature and applied load type. In particular, it allowed us to perform predictions within an error interval of about ±25% in stress, even though some material mechanical properties were either estimated or taken from different sources.