A unified model of coupled arc plasma and weld pool for double electrodes TIG welding

Abstract

A three-dimensional model containing tungsten electrodes, arc plasma and a weld pool is presented for double electrodes tungsten inert gas welding. The model is validated by available experimental data. The distributions of temperature, velocity and pressure of the coupled arc plasma are investigated. The current density, heat flux and shear stress over the weld pool are highlighted. The weld pool dynamic is described by taking into account buoyance, Lorentz force, surface tension and plasma drag force. The turbulent effect in the weld pool is also considered. It is found that the temperature and velocity distributions of the coupled arc are not rotationally symmetrical. A similar property is also shown by the arc pressure, current density and heat flux at the anode surface. The surface tension gradient is much larger than the plasma drag force and dominates the convective pattern in the weld pool, thus determining the weld penetration. The anodic heat flux and plasma drag force, as well as the surface tension gradient over the weld pool, determine the weld shape and size. In addition, provided the welding current through one electrode increases and that through the other decreases, keeping the total current unchanged, the coupled arc behaviour and weld pool dynamic change significantly, while the weld shape and size show little change. The results demonstrate the necessity of a unified model in the study of the arc plasma and weld pool.