Abstract
Background: A compact complex impedance-transforming balun for UHF frequencies, which is based on a coupled-line structure that matched all ports and provided high output port isolation, was designed in this paper. Methods: A lumped component transformation was used to minimize circuit size. The implemented circuit operated at 433 MHz with the reflection coefficients less than -16 dB at all ports, 0.22 dB amplitude balance and 180° phase balance at the output ports. The signal coupling between the output ports was -16.8 dB. The circuit size is small at 0.032λ. Results: Complex impedance-transforming baluns were designed to operate at 433 MHz. The source impedance at port 1 was set at Zs = 12 - j12Ω and the load impedances at port 2 and 3 were set at ZL = 80 + j30Ω. Conclusion: A compact complex impedance-transforming balun at UHF frequency, with all ports matched and high isolations, was designed and illustrated in this paper.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.