Abstract

Abstract Moonpool resonance is investigated in a two-dimensional setting in terms of regular, forced heave motions of a model with moonpool with different rectangular-shaped recess configurations. A recess is a reduced draft zone in the moonpool. Dedicated experiments were carried out. The model consisted of two boxes of 40 cm width each, with a distance of 20 cm between them. Recess configurations varying between 5 cm and 10 cm in length and 5 cm in height were tested. Different drafts were also tested. A large number of forcing periods and five forcing amplitudes were tested. A time-domain boundary element method (BEM) code based on the linear potential flow theory was implemented to investigate the resonance periods, mode shapes, as well as the moonpool response as predicted by the (linear) potential flow theory. Dominant physical effects were discussed, in particular damping due to flow separation from the sharp corners of the moonpool inlet and recess. The effect of the recess on the piston-mode behavior is discussed. The nondimensional moonpool response suggests strong viscous damping at the piston-mode resonance. The viscous BEM (VBEM) simulations demonstrate improvement over inviscid BEM, although further improvement of the method is needed. The VBEM simulations are, in general, in good agreement with the experiments. For the largest recess case, some discrepancies are observed in the amplitude-dependent response amplitude operators (RAOs). The piston-mode shapes are clearly different from the near flat free-surface elevation for a moonpool without recess, consistent with the recently published theory.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call