A turbidimetric method to measure isoelectric points and particles deposition onto massive substrates

Abstract

A simple experimental approach was developed to determine the adhesion rate of particles onto massive substrate. Turbidimetry measurements are used to follow the evolution of particle concentration in a suspension in dynamic contact with the walls of a vessel made of different materials. This method allows to rapidly obtain qualitative results about the adhesion of metallic oxides particles on massive substrates. Adhesion of particles of charged latex onto glass was used to validate the approach and was shown to be a method to determine isoelectric points (IEP) of massive substrates. Then, the adhesion of an iron oxide (hematite) particles onto several substrates was studied to determine the reactivity of current labware (glass, polypropylene) and on a metal (aluminum) commonly found in industrial fouling problems. Adhesion of hematite was found to be pH-dependant, and occurs only below ca. 6 (glass) or 7 (polypropylene), and above 7 (aluminum). DLVO calculations were performed to model the hematite/water/glass system and are consistent with the experimental results. Experiments at temperature 7–50 °C have shown an increasing of the adhesion rate from 7 to 40 °C, then a constant value until 50 °C.