Abstract
In this study, friction performance, surface textures, and wear mechanisms of Titanium Grade (Gr) 2 material were investigated with a pin-on-disc tester. The study was carried out under dry, basefluid (vegetable-based oil), graphene nanoplatelets (GNPs), hexagonal boron nitride (hBN) nanofluids, and GNPs+hBN hybrid nanofluid conditions. In addition, the fluid's viscosity and thermal conductivity coefficient measurements were carried out. As the performance criterion of the pin-on-disc test, coefficient of friction (COF), vibration peak values, surface roughness (Ra profile), and topography, wear and wear mechanisms were preferred. With the data obtained after pin-on-disc tests, it can be said that the GNPs+hBN hybrid nanofluid condition shows the best performance compared to other conditions. GNPs+hBN hybrid condition, compared to the dry condition, decreased the COF average, vibration average, and Ra values by 20%, 52%, and 62%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
