Abstract

A novel transverse velocity spectral estimation method is proposed to estimate the velocity component in the direction transverse to the beam axis for ultrafast imaging. The transverse oscillation was introduced by filtering the envelope data after the axial oscillation was removed. The complex transverse oscillated signal was then used to estimate the transverse velocity spectrum and mean velocity. In simulations, both steady flow with a parabolic flow profile and temporally varying flow were simulated to investigate the performance of the proposed method. Next, the proposed approach was used to estimate the flow velocity in a phantom with pulsatile flow, and finally, this method was applied in vivo in a small animal model. Results of the simulation study indicate that the proposed method provided an accurate velocity spectrogram for beam-to-flow angles from 45° to 90°, without significant performance degradation as the angle decreased. For the simulation of temporally varying flow, the proposed method had a reduced bias ( % versus 73.3%) and higher peak-to-background ratio (PBR) (>15.6 versus 10.5 dB) compared to previous methods. Results in a vessel phantom show that the temporally varying flow velocity can be estimated in the transverse direction obtained using the spectrogram produced by the proposed method operating on the envelope data. Finally, the proposed method was used to map the microvascular blood flow velocity in the mouse spinal cord, demonstrating the estimation of pulsatile blood flow in both the axial and transverse directions in vivo over several cardiac cycles.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call