Abstract

This paper introduces a new single-phase AC-AC converter based on an impedance source circuit. Like the existing single-phase impedance source AC-AC converters, it has the buck-boost ability and direct ac conversion. The input and output voltage possesses the same ground, and the phase angle is maintained and reversed smoothly. The presented converter utilizes a coupled transformer which allows the designer to exploit the transformer’s turns ratio as a variable to attain the desired output voltage. Additionally, the used transformer provides an option to obtain higher voltage gain by decreasing the turns ratio. Hence, smaller size of the coupled inductors is required for the higher voltage cases. To eliminate the switching voltage and current spikes on the power switches, a safe commutation strategy is used instead of utilizing snubber circuits. Furthermore, the input current is continuous and sinusoidal with low harmonics thanks to embedding the input inductor in series with the input source. Additionally, a dynamic voltage restorer is presented based on the proposed converter to compensate the voltage sag and swell faults. Simulation results are provided to evaluate the theoretical analysis. Finally, a laboratory prototype has been fabricated to demonstrate the validation of the presented converter.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.