Abstract
To enable the capacity of climbing robots to work on steep surfaces, especially on inverted surfaces, is a fundamental but challenging task. This capacity can extend the reachable workspace and applications of climbing robots. A track-type inverted climbing robot called SpinyCrawler was developed in this paper. Using a spiny track with an opposed gripping mechanism, the robot was experimentally demonstrated to have the ability of generating considerable adhesion to achieve stable inverted climbing. First, to guarantee reliable attachment of the robot on rough ceilings, a spiny gripper inspired by the opposed gripping prolegs of caterpillars is designed, and a gripping model of the interaction between spines and the ceiling asperities is established and analyzed. Second, a spiny track is developed by assembling dozens of spiny grippers to enable continuous attachment. A cam mechanism is introduced in the robot design without extra actuators to achieve stable attachment and easy detachment during continuous climbing. Finally, climbing experiments are conducted on different surfaces, using a SpinyCrawler prototype. Experimental results demonstrated stable climbing ability on various rough inverted and vertical surfaces, including concrete walls, crushed stone walls, sandpaper walls, brick walls, and brick ceilings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.