Abstract

AbstractThe paper describes a vertical component magnetometer for field work whose magnet system is provided with a torsion axis and in which torsion serves as a standard of measurement. When a measurement is taken the magnetic axis of the system is brought back into the horizontal position by altering the angle of twist (null‐method). The angle of twist is thus a direct measure of the vertical intensity. The instrument is within wide limits independent of the magnetic north‐south direction and may therefore be set up in practically any position. The magnet system is temperature compensated, well damped and provided with an automatic clamping device. With a scale value of 25 gammas per scale division the range of the instrument for direct measurements is 65000 gammas. A tripod of special design enables a measurement to be taken in about one minute. The weight of the torsion magnetometer inclusive of tripod is only 2.9 kg (6.4 lb).

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.