Abstract
In this paper, to improve the heat dissipation efficiency of a radiator for focal plane assemblies, a topology optimization method is introduced into the design process. For the realization of the optimization, an objective of maximal thermal stiffness concerning the radiator is formulated. The topology optimization is performed under the same mass constraint of 2.05 kg as the initial design. To improve the manufacturability of topology optimization result, an inverse design is conducted to reconstruct a new model. In transient thermal simulation, the average maximal temperature on focal plane assemblies with a reconstructed radiator is 8.626 °C, while the average maximal temperature with the initial design is 9.793 °C. Compared to the initial design, a decrease of 1.167 °C on maximal temperature is achieved. As the heat dissipation efficiency of the proposed radiator design is improved compared to the initial design, it is meaningful in future applications.
Highlights
To improve the heat dissipation efficiency of a radiator that works for focal plane assemblies on a miniaturized space optical device, topology optimization is introduced into the design process
The reconstructed radiator design optimized the material distribution under prescribed constraints, which is meaningful in future applications
An average decrease of 1.167 ◦ C on CCD is achieved with the reconstructed radiator
Summary
Changchun Institue of Optics, Fine Mechanics and Physics (CIOMP), Chinese Academy of Sciences, Changchun 130033, China. SKLAO, Changchun Institue of Optics, Fine Mechanics and Physics (CIOMP), Chinese Academy of Sciences, Center of Materials Science and Optoelectrics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have