A thermomechanically coupled finite-strain constitutive model for cyclic pseudoelasticity of polycrystalline shape memory alloys

Abstract

This paper presents a new 3D thermomechanical finite-strain constitutive model for cyclic pseudoelasticity of polycrystalline shape memory alloys (SMAs). The model considers four primary characteristics related to the cyclic behavior of SMA that have not been integrally addressed within the finite-strain framework: (i) large accumulated residual strain that results from the residual martensite and dislocations slipping during cycling; (ii) degeneration of pseudoelasticity and hysteresis loop due to the increase of dislocation density and internal stresses with the number of cycles; (iii) rate dependence that can be attributed to the thermomechanical coupling effect; (iv) evolution of the phase transformation from abrupt to smooth transition, as a consequence of the diversified crystallographic orientations of the grains, the heterogeneity of internal stresses, and the presence of non-transforming precipitates during cycling. Based on the decomposition of finite Hencky strain into elastic, transformation, residual and thermal components, the model is constructed within a thermodynamically consistent framework. Evolution equations associated with the internal variables are derived from the reduced form of energy balance, the Clausius-Duhem form of entropy inequality, and a Helmholtz free energy function that includes elastic, thermal, interaction and constraint energies. The model is used to simulate the cyclic tensile experiments on NiTi wire at different loading rates. The good agreement of the model predictions against the experimental data demonstrates the capabilities of the proposed model to well describe cyclic pseudoelasticity of polycrystalline SMAs, and to capture the aforementioned characteristics. Furthermore, in order to demonstrate the capability of the cyclic model to solve multi-axial problems, a finite elements simulation of a SMA torsion spring undergoing large strains and rotations resulting in local multi-axial non-proportional stress and strain evolutions is performed.