A thermodynamic framework to identify apposite refrigerant former for hydrate-based applications

Abstract

High latent heat storage capacity with naturally assisted salt rejection makes the clathrate compounds appropriate for applications towards load management and desalination processes. Adding to these energy savings are the ease of operations provided by water and the mild conditions at which the refrigerant hydrates are occurred. A direct comparison between these hydrates becomes unfeasible due to the scattered experimental data. Though thermodynamics can streamline this dispersed data, they are currently limited to being a proof of concept most accurately representing the experimental observations. We address this critical deficit of phase assessment and identify, from among R13, R14, R22, R23, R125, R134a and R152a, the most suitable hydrate former for the concerned application. An approach based on van der Waals and Platteeuw model is undertaken and the estimates are quantified in terms of percent average absolute relative deviations (% AARD). An average AARD of 1.75% and 2.68% is observed in pure and aqueous electrolytic phase of NaCl, KCl, CaCl2 and MgCl2, respectively. The model predictions are then estimated at temperature/salinity of 281 K/0 wt% and 284 K/3.5 wt%. Together with the qualitative assessment of the hydrate phase, viz, vapor pressure, compressibility and dissociation enthalpy, R152a refrigerant is observed to be the appropriate former for applications to both load management and desalination.