A Thermal Nonequilibrium Approach to Natural Convection in a Square Enclosure Due to the Partially Cooled Sidewalls of the Enclosure

Abstract

This article presents a numerical investigation of steady non-Darcy natural convection heat transfer in a square cavity filled with a heat-generating porous medium with partial cooling using a local thermal nonequilibrium (LTNE) model. Five different partial cooling boundary conditions and the fully cooled boundary condition are investigated under LTNE and local thermal equilibrium (LTE). The cooling portions of the left and the right sidewalls of the cavity are maintained at temperature T 0 while the enclosure's top and bottom walls, as well as the inactive parts of its sidewalls, are kept insulated. The simulation results show that the placement order of wall cooling has a significant effect on the flow pattern and heat transfer rate. Compared with the fully cooled wall, the partially cooled wall of the cavity yielded a higher local Nusselt number for both fluid and solid phases. Under the same boundary conditions, the LTNE and LTE models can demonstrate significant differences in flow patterns and temperature fields. The total heat transfer rate increases with both Darcy number and Rayleigh number. Enhancement of interphase heat transfer coefficient (H) reduces the impact of Darcy number on the heat transfer rate of a porous cavity. Also, the total heat transfer rate of the porous medium decreases steadily with thermal conductivity ratio γ and interphase heat transfer coefficient H.