A temperature- and strain-rate-dependent isotropic elasto-viscoplastic model for glass-fiber-reinforced polyurethane foam

Abstract

Abstract The primary aim of the present study is to provide a new constitutive model and its computational procedure for a glass-fiber-reinforced polyurethane foam (RPUF) subjected to various cryogenic temperatures and compressive loading rates. A Frank–Brockman-type isotropic elasto-viscoplastic model was introduced to describe the hardening and softening phenomena of RPUF under compressive loads. In addition, the increase of the yield strength and plateau according to the change of temperature and strain rates was demonstrated using the given constitutive model. The introduced numerical model was transformed as an implicit form and was implemented into a user-defined subroutine of commercial finite element analysis (FEA) code, i.e., ABAQUS UMAT. Based on the developed material library, the complex elasto-plastic behavior of RPUF under various cryogenic temperatures and strain rates was numerically estimated. The variation of material internal variables, such as hardening and softening control parameters, was quantitatively investigated, and the temperature- and strain-rate-dependent empirical formulae, namely, a polynomial multiple regression model, were proposed. Finally, the simulation results were compared with a series of compressive test results to validate the proposed method. On using the developed numerical method, it might be feasible to predict the unknown stress–strain behavior of RPUF under arbitrary severe environments.